Key Features

Shaft

• The shaft is fabricated from cold-rolled, welded steel tubing. Depending on requirements tubing is supplied in 3-1/2″, 4-1/2″, 5-1/2″ and 6-1/2″ outside diameters.
• Standard termination of the shaft is a 2-3/8″ OD x 5″ tenon.

Anchor Base

• The anchor base is fabricated from structural steel and is circumstantially welded inside and outside to the pole shaft.

Hand Hole

• Supplied with a 3” x 5” (or 4” x 8”) hand hole opening and a weather proof cover. A ground lug is welded inside the shaft accessible from the hand hole opening.

Finish

• The standard finish is 2C polyurethane or hot dipped galvanized.